Dell PowerConnect W-Airwave - Integrating AWMS with an Existing Network Management Solution (NMS)

Dell PowerConnect W AirWave 7.1 | User Guide Configuring AWMS | 73
Integrating AWMS with an Existing Network Management Solution
(NMS)
This is an optional configuration. The AMP Setup > NMS configuration page allows AWMS to integrate with
other Network Management Solution (NMS) consoles. This configuration enables advanced and interoperable
functionality as follows:
 AWMS can forward WLAN-related SNMP traps to the NMS, or AWMS can send SNMPv1 or SNMPv2 traps
to the NMS.
 AWMS can be used in conjunction with Hewlett-Packard’s ProCurve Manager.
 The necessary files for either type of NMS interoperability are downloaded from the AMP Setup > NMS page
as follows. For additional information, contact Dell support.
Perform these steps to configure NMS
support in AWMS:
1. Navigate to the AMP Set
up > NMS page, illustrated in Figure 36.
Figure 36 AMP Setu
p > NMS Integration Page Illustration
2. Click Ad
d to integrate a new NMS server, or click the pencil icon to edit an existing NMS server. Provide the
information described in Table 35:
Figure 37 AMP Setup >
NMS Integration Add/Edit Page Illustration