Dell PowerConnect W AirWave 7.1 | User Guide Creating, Running, and Emailing Reports | 271
Using the Device Uptime Report
The Device Uptime Report monitors device performance and availability on the network, tracking uptime by
multiple criteria to include the following:
Total average uptime by SNMP and ICMP
Average uptime by device group
Average uptime by device folder
You can use this report as the central
starting point to improve uptime by multiple criteria. This report covers
protocol-oriented, device-oriented, or SSID-oriented information. This report can help to monitor and optimize
the network in multiple ways. This report can demonstrate service parameters, can establish locations that have
superior or problematic uptime availability, and can help with additional analysis in multiple ways. Locations,
device groups, or other groupings within a network can be identified as needing attention or can be proven to
have superior performance when using this report.
Perform these steps to view the most
recent version of the Device Uptime report.
1. Navigate to the R
eports > Generated page.
2. Scroll to the bottom, and click Device Up
time Report to display report Detail information.
3. To generate more reports of
this type that cover a greater span of time, refer to “Reports > Definitions Page
Overview” on page26
1.
Figure 188 and Table 137 illustrate and describe the Repo
rts > Generated > Device Uptime Detail report.
Average Bandwidth (kbps) Displays the average bandwidth throughput for the device during the period of time covered by the
report.
Location Displays the location of the device that is included in any category of the report.
Controller Displays the controller to which an
y included device is associated.
Folder Displays the folder with which a device is associated.
Group Displays the device group with wh
ich a device is associated.
Table 137 Reports > Generated > Daily Device Summary Report Fields and Descriptions
Field Description
To Next Page
Loading...
