Figure 25. Witness Mac1, Mac2 provided from a GET on redfish/v1/Chassis/
System.Integrated.1-1_System.Chassis.1-1
Witness host network: RACADM
About this task
Witness host network information through RACADM is found with the `racadm hwinventory` command.
Figure 26. Witness host information through RACADM
Witness host network: Witness host OS
About this task
See Witness serial communication for details on serial connection to the Witness.
Limited interaction with the Witness host is possible depending on the headless capabilities of the installed host. Refer to
external host-specific documentation to identify headless-mode capabilities.
This section additionally assumes that the Witness host installed has been properly configured for network access. For additional
information, see Witness host deployment.
Witness host network: ESXi
About this task
The ESXi Witness host supports multiple methods of getting the Witness IP address including:
Initial system setup and configuration
33
To Next Page
Loading...
