Getting system component versions
About this task
Most system component versions are easily accessible through examples given in User interfaces: iDRAC.
Getting component version: Witness BIOS
About this task
The Witness BIOS version can be found through:
● iDRAC
1. GUI
2. Redfish
3. RACADM
4. CPLD
● Witness ESXi OS interface
Getting component version: Witness manager (MCU)
About this task
The Witness MCU version can be found through:
● iDRAC
1. GUI
2. Redfish
3. RACADM
4. CPLD
● Chassis manager serial connection
Getting component version: Witness i210 NIC
About this task
The Witness i210 NIC FW can only be found through potential host interfaces or vendor tools run on the host. Please see
Updating Witness i210: Witness host for some information pertaining to vendor tools.
Getting component version: Witness M.2 FW
About this task
The Witness M.2 card firmware versions can be found through the Witness host through standard operations. Documentation
for the specific Witness host should be located online.
Example provided for ESXi shell only:
Figure 30. ESXi M.2 card firmware version
36
Initial system setup and configuration
To Next Page
Loading...
