RASRISO to RASRUSB tool instructions
Follow the steps to create a RASRUSB key from RASR ISO file.
Extract the ISO image
1. Go to dell.com/support, enter XR4000w Witness sled service tag.
2. Download RASRISOtoUSB.zip from drivers and downloads section on the XR4000w support page.
3. Extract the RASRISOtoUSB.zip file.
Figure 48. Extracting the ISO image
Check files
1. Confirm that the following files are visible after extracting.
Recovering the Witness host OS
59
To Next Page
Loading...
