Chassis Manager, Witness MCU, or Witness
BIOS DUPs failing
About this task
NOTE: Witness BIOS DUPs should be expected to run anywhere from 45-90 minutes before completion.
1. Attempting to install incompatible firmware
2. iDRAC job queue task immediately “Failed” or stuck in “Scheduling (0%)”
a. clear iDRAC job queue with
racadm jobqueue delete -i JID_CLEARALL_FORCE
b. reset the BMC
c. re-attempt to install DUP
15
70 Chassis Manager, Witness MCU, or Witness BIOS DUPs failing
To Next Page
Loading...
