Jumpers and connectors
This topic provides some basic and specific information about jumpers and switches. It also describes the connectors on the
various boards in the system. Jumpers on the system board help to disable the system and reset the passwords. To install
components and cables correctly, you must know the connectors on the system board.
Topics:
• System board jumpers and connectors
• DIP switch settings
• Disabling a forgotten password
System board jumpers and connectors
Figure 56. System board jumpers and connectors
1.
Memory heat sink 2. Processor and heat sink
3. M.2 SSD card slot 4. M.2 SSD card latch
5. Power button 6. Micro USB connector for system console
7. USB 3.0 port 8. Network Interface Controller (NIC) ports
9. DIP switch 10. CMOS battery
11. Memory heat sink 12. PIB connector
16
Jumpers and connectors 71
To Next Page
Loading...
