Dell PowerVault TL2000 Reference Guide

LOG SELECT (4Ch)
The LOG SELECT command provides a means for the host to clear the event log in the media changer.
This event log is maintained in the media changer internal NVRAM and is therefore resistant to power
failures. The only method to clear the event log is by means of a LOG SELECT command.
Bit 7 6 5 4 3 2 1 0
Byte
0 Operation Code (4Ch)
1 LUN Reserved PCR SP (0)
2 PC Reserved
3 Reserved
4 Reserved
5 Reserved
6 Reserved
7 (MSB) Parameter List Length
8 (LSB)
9 Control
Field descriptions:
PCR: The Parameter Code Reset (PCR) bit is not supported. Must be set to zero.
SP: Saving log Parameters is not supported. Must be set to zero.
Parameter List Length:
The Log Select parameters are not supported.
3-10 TL2000 and TL4000 SCSI Reference

Dell PowerVault TL2000 Specifications

General

Number of Drives	1 or 2
Number of Slots	24
Type	Tape Library
Drive Types	LTO-4, LTO-5, LTO-6
Interface	SAS, Fibre Channel
Dimensions	8.68 in (22.05 cm) x 19.0 in (48.26 cm) x 30.0 in (76.2 cm)
Tape Drive Compatibility	LTO-4, LTO-5, LTO-6
Power Supply	Redundant power supplies optional
Operating Temperature	50°F to 95°F (10°C to 35°C)
Non-operating Temperature	-40°F to 140°F (-40°C to 60°C)