POSITION TO ELEMENT (2Bh)
The POSITION TO ELEMENT allows the initiator to position the Medium Transport Element to a specific
element address position. This destination address can be a Storage Element, Import/Export Element or a
Data Transfer Element address.
Bit 7 6 5 4 3 2 1 0
Byte
0 Operation Code (2Bh)
1 LUN Reserved
2 (MSB) Medium Transport Address
3 (LSB)
4 (MSB) Destination Address
5 (LSB)
6 Reserved
7 Reserved
8 Reserved Invert
9 Control
Field descriptions:
Medium Transport Address:
This field contains either 0 or the currently valid element address of the Medium Transport
Element.
Destination Address:
This field contains the destination element address for the Position to Element command. This
destination address can be a Storage Element, Import/Export Element or a Data Transfer Element
address.
Invert:
The library does not support medium rotation. This value must be set to 0.
3-48 TL2000 and TL4000 SCSI Reference
To Next Page
Loading...
