Dell PowerVault - Show Host Ports; Show Physical Disk

Parameter
Parameter Description
diskPool
The alphanumberic identifier of the disk pool
(including – and _) that you want to set to a
Complete state. Enclose the diskPoolName in
square brackets ([ ]).
Show Host Ports
Description
For all HBA host ports connected to a storage array, this command returns the following information:
• HBA host port identifier
• HBA host port name
• HBA host type
Syntax
show allHostPorts
Parameters
None.
Additional Information
This command returns HBA host port information similar to this example.
HOST PORT IDENTIFIER HOST PORT NAME HOST TYPE
12:34:56:54:33:22:22:22 Jupiter1 Solaris
12:34:56:78:98:98:88:88 Pluto 1 Windows 2000/Server 2003
Clustered
54:32:12:34:34:55:65:66 Undefined Undefined
Show Physical Disk
Description
For each physical disk in the storage array, this command returns the following information:
• The total number of physical disks
• The type of physical disk (SAS)
• Basic physical disk information:
– Enclosure location and slot location
326