Dell PowerVault - Stop Snapshot Rollback; Stop Snapshot Image Rollback

Parameter Description
Enter the names of the virtual disks using these
rules:
• Enclose all of the names in square brackets ([ ]).
• Separate each of the names with a space.
If the virtual disk names have special characters or
numbers, enter the names using these rules:
• Enclose all of the names in square brackets ([ ]).
• Enclose each of the names in double quotation
marks (" ").
• Separate each of the names with a space.
Stop Snapshot Rollback
Description
This command stops a snapshot rollback operation that was initiated by the start rollback virtual disk
command.
NOTE: Canceling a rollback operation leaves the base virtual disk in an indeterminate state with
potentially invalid or inconsistent data. The related snapshot virtual disk becomes disabled and
unusable.
Syntax
stop rollback virtualDisk [snapshotVirtualDiskName]
Parameters
Parameter Description
virtualDisk
Names the specific snapshot virtual disk for which
you want to resume a rollback operation. Enclose
the snapshot virtual disk name in square brackets
([ ]). If the snapshot virtual disk name has special
characters, you must also enclose the snapshot
virtual disk name in double quotation marks (" ").
Stop Snapshot Image Rollback
Description
This command stops a snapshot image rollback operation that was initiated by the start snapImage
rollback
command.
NOTE: Canceling a snapshot image rollback operation leaves the base virtual disk in an
indeterminate state with potentially invalid or inconsistent data. The related snapshot image virtual
disk becomes disabled and unusable.
377