Dell PowerVault - Show Virtual Disk

• Details:
– The virtual disk ID
– The subsystem ID
– The physical disk type (SAS)
– Enclosure loss protection
– The preferred owner
– The current owner
– The segment size
– The modification priority
– The read cache status (enabled or disabled)
– The write cache status (enabled or disabled)
– The write cache without batteries status (enabled or disabled)
– The write cache with mirroring status (enabled or disabled)
– The flush write cache after time
– The cache read prefetch setting (TRUE or FALSE)
– The enable background media scan status (enabled or disabled)
– The media scan with redundancy check status (enabled or disabled)
• The snapshot (legacy) repository virtual disks
• The mirror repository virtual disks
• The snapshot (legacy) virtual disks
• The snapshot (legacy) copies
Syntax
show (allVirtualDisks | virtualDisk [virtualDiskName] |
virtualDisks [virtualDiskName1 ...virtualDiskNameN]) summary
Parameters
Parameter Description
allvirtualDisks
The setting to return information about all of the
virtual disks in the storage array.
virtualDisk or virtualDisks
The name of the specific virtual disk for which you
are retrieving information. You can enter more
than one virtual disk name. Enclose the virtual disk
name in square brackets ([ ]). If the virtual disk
name has special characters, you also must
enclose the virtual disk name in double quotation
marks (“ ”).
summary
The setting to return a concise list of information
about the virtual disks.
350