• Make sure that the paper size is correctly set. For example, if Multipurpose Feeder Size is set to
Universal, then make sure the paper is large enough for the data being printed.
• Cancel the print job.
Insucient
memory to support Resource Save feature [35]
Try one or more of the following:
• From the printer control panel, press to disable Resource Save, clear the message, and continue
printing.
• Install additional printer memory.
Insucient
memory to collate job [37]
Try one or more of the following:
• From the printer control panel, press to print the portion of the job already stored and begin
collating the rest of the print job.
• Cancel the current print job.
Insucient
memory, some Held Jobs were deleted [37]
From the printer control panel, press to clear the message.
Insucient
memory, some held jobs will not be restored [37]
Do either of the following:
• From the printer control panel, press to clear the message.
• Delete other held jobs to free up additional printer memory.
Load multipurpose feeder with [custom type name] [orientation]
Try one or more of the following:
• Load the multipurpose feeder with the correct size and type of paper.
• From the control panel, press to clear the message and continue printing.
Note: If no paper is loaded in the multipurpose feeder, the printer manually overrides the request,
and then prints from an automatically selected tray.
• Cancel the current job.
Troubleshooting 109
To Next Page
Loading...
Need help?
General
