Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
148
To add a custom portal logo:
1 Navigate to Portals > Portals and click Configure next to the existing portal to which you want to add a
custom logo. The Edit Portal screen displays.
2Click the Logo tab.
3Click Choose File by the Upload Logo field. The file browser window displays.
4 Select an appropriate-sized .gif format logo in the file browser and click Open.
5Select Light or Dark from the Background drop-down list. Select a background shade that helps set off
your logo from the rest of the portal page.
6Click Update Logo to transfer the logo to the SMA/SRA appliance.
7Click Default Logo to revert to the default Dell SonicWALL logo.
8Click Accept to save changes.
NOTE: The custom logo must be in GIF format. In a modern portal, there is a hard size limit
of 155x68 pixels. Anything larger than this is cropped to fit the designated logo space on
the page. In a legacy portal, for the best aesthetic results, import a logo with a transparent
or light-colored background. The recommended, but not mandatory, size is 155x36 pixels.
To Next Page
Loading...
