Dell SMA 200 - Adding a URL Based Aliasing Group; Adding Members; Deleting a Group; URL Based Aliasing Overview

Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
200
Adding members
URL Based Aliasing allows you to add up to 100 members to a group.
To add members to a URL Based Aliasing group:
1 Navigate to the Portals > URL Based Aliasing page.
2Click the Configure icon of the group you want to modify. The Group URL Based Aliasing Settings page
displays.
3Click Add Member. The Add URL Based Aliasing Member page displays.
Configure the following fields:
•URL — Enter the URL or name of the member.
• Comments — Enter any additional information. Anything entered in this field displays on the
Index page.
•Scheme — Select from the drop-down list the scheme of the backend server. Select between
HTTP, HTTPS, or AUTO.
• Application Server Host — Enter a Hostname, IPv4 address, or IPv6 address of the host.
•Port — Specify the port number. The default value is 443.
4Click Accept to save changes and add a member to the group. The newly added member appears on the
URL Based Aliasing Settings page.
Repeat steps 2 through 4 for each member you wish to add to the group.
Deleting a group
To delete a specific group:
1 Navigate to the Portal > URL Based Aliasing page.
2Click the Delete icon of the group you wish to delete.
NOTE: You must create a URL Based Aliasing group before you can begin adding members to the group.