Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
227
6Click Accept to update the configuration. After the configuration has been updated, the new policy is
displayed in the Services > Policies window.
Editing a Policy
To edit a service-related policy, navigate to the Services > Policies screen. Click on the pencil icon in the
Configure column. A new Edit Policy window opens with the bookmark’s current configuration. Make all
desired adjustments and select Accept. The edited bookmark still displays in the Services > Policies window.
Deleting a Policy
To delete a configured policy, navigate to the Services > Policies screen. Click on the “X” icon in the
Configure column. A dialog box opens and asks if you are sure you want to delete the specified policy. Click OK
to delete the policy. The policy no longer appears in the Services > Policies screen.
TIP: When using Citrix bookmarks, in order to restrict proxy access to a host, a DENY rule must be
configured for both Citrix and HTTP services.
NOTE: Dell SonicWALL recommends that administrators set up a Global Deny ALL policy that allows access
to only trusted hosts. This prevents outbound requests to malicious hosts from Secure Mobile Access.
To create a Global Deny ALL policy:
1From the Services > Policy page, click Add Policy.
2For Policy Owner, select Global Policy from the drop-down list.
3For Apply Policy To, select All Addresses from the drop-down list.
4For Policy Name, create a friendly name for this policy, such as “Deny ALL.”
5The IP Address Range automatically defaults to All IP Addresses.
6For Service, select All Services from the drop-down list.
7For Status, select Deny from the drop-down list.
To Next Page
Loading...
