Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
281
•Disable – Disables Web Application Firewall inspection for the host.
• Detect – Lowers the action level from prevention to only detection and logging for the host.
•No Action – Web Application Firewall inspects host traffic, but takes no action.
4In the Host field, type in the host entry as it appears in the bookmark or offloaded application. This can
be a host name or an IP address. Up to 32 characters are allowed. To determine the correct host entry
for this exclusion, see Determining the Host Entry for Exclusions on page 290.
You can configure a path to a particular folder or file along with the host. The protocol, port, and the
request parameters are simply ignored in the URL. If a path is configured, then the exclusion is
recursively applied to all subfolders and files. For instance, if Host is set to
webmail.company.com/exchange, then all files and folders under exchange are also excluded.
5Click Add to move the host name into the list box.
6Repeat Step 4 and Step 5 to add more hosts to this exclusion.
7 When finished, click Accept.
Configuring Intrusion Prevention Error Page Settings
To configure the error page to use when intrusions are detected:
1 Expand the Intrusion Prevention Error Page Settings section.
2In the Intrusion Prevention Response drop-down list, select the type of error page to be displayed
when blocking an intrusion attempt.
To Next Page
Loading...
