Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
327
Exporting and Emailing Log Files
You can export the current contents of the log to a file, or email the log contents by using the buttons in the top
right corner of the Geo IP & Botnet Filter > Log page.
Exported files are saved with a .wri file name extension, and open with WordPad, by default.
Emailed files are automatically sent to the address configured on the Log > Settings page of the Secure Mobile
Access management interface. If no address is configured, the Status line at the bottom of the browser displays
an error message when you click E-Mail Log.
To export or email the log:
1 To export the log contents, click Export in the top right corner of the Geo IP & Botnet Filter > Log page.
The File Download dialog box is displayed.
2 In the File Download dialog box, do one of the following:
• To o p en t h e fi l e , c l i c k Open.
• To s a v e t h e fi l e , c l i c k Save, then browse to the folder where you want to save the file and click
Save.
3 To email the log contents, click E-Mail Log in the top right corner of the Geo IP & Botnet Filter > Log
page. The log contents are emailed to the address specified in the Log > Settings page.
Clearing the Log
You can remove all entries from the log on the Geo IP & Botnet Filter > Log page. The entries on the page are
removed, and any attempt to export or email the log file while it is still empty causes a confirmation dialog box
to display.
To clear the log, complete the following steps:
1 On the top right corner of the Geo IP & Botnet Filter > Log page, click Clear.
2Click OK in the confirmation dialog box.
To Next Page
Loading...
