Dell SMA 200 - Page 348

Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
348
• Use group setting - Take the action specified by the group setting. See Editing Group Settings on
page 384.
• Allow saving of user name only - Allow caching of the user name. The user only needs to enter
a password when starting NetExtender. Overrides the group setting.
• Allow saving of user name & password - Allow caching of the user name and password. The
user is automatically logged in when starting NetExtender. Overrides the group setting.
• Prohibit saving of user name & password - Do not allow caching of the user name and
password. The user is required to enter both user name and password when starting NetExtender.
Overrides the group setting.
8In the Allow client to use Touch ID on IOS devices, the control only blocks future attempts to log in with
fingerprint technology on IOS devices when the option is disabled as there is no method for the server to
change the client settings until the client attempts a connection. So in some cases, a client might not be
conforming to previous policies for the initial connection. Configuration is allowed globally, by group, or
per user.
9In the Allow client to use Fingerprint Authentication on Android devices, the control only blocks
future attempts to log in with fingerprint technology on Android devices when the option is disabled as
there is no method for the server to change the client settings until the client attempts a connection. So
in some cases, a client might not be conforming to previous policies for the initial connection.
Configuration is allowed globally, by group, or per user.
10 In the Internal Proxy Settings section, select from the drop-down list to enable or disable the Internal
Proxy feature. See NetExtender > Client Settings on page 234 for more information.
11 Click Accept.
To enable NetExtender ranges and configure DHCP client settings for a user:
1 Navigate to Users > Local Users.
2 Click the configure icon next to the user you want to configure.
3In the Edit Local User page, select the NxSettings tab.
aUnder NetExtender Client Address Range, select Use DHCP from the drop-down list.
bUnder Select Interface, use the drop-down list to select the interface to use for DHCP.
cSupply the DHCP Server in the field provided.
dUnder NetExtender Client IPv6 Address Range, optionally select Use DHCP from the drop-
down list.
eUnder Select Interface, use the drop-down list to select the interface to use for DHCPv6.
fSupply the DHCPv6 Server in the field provided.
4Under NetExtender Client Settings, select one of the following from the Exit Client After Disconnect
drop-down list:
• Use group setting - Take the action specified by the group setting. See Editing Group Settings on
page 384.
•Enabled - Enable this action for the user. Overrides the group setting.
•Disabled - Disable this action for all members of the group. Overrides the global setting.
5In the Uninstall Client After Exit drop-down list, select one of the following:
• Use group setting - Take the action specified by the group setting. See Editing Group Settings on
page 384.
•Enabled - Enable this action for the user. Overrides the group setting.
•Disabled - Disable this action for all members of the group. Overrides the global setting.
6In the Create Client Connection Profile drop-down list, select one of the following: