Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
351
5In the Apply Policy to field, click the IP Address option.
6 Define a name for the policy in the Policy Name field.
7 Type an IP address in the IP Address field.
8In the Port Range/Port Number field, optionally enter a port range or an individual port.
9In the Service drop-down list, click on a service object.
10 In the Status drop-down list, click on an access action, either Allow or Deny.
11 Click Accept.
Adding a Policy for an IP Address Range
1In the Apply Policy to field, click the IP Address Range option.
2 Define a name for the policy in the Policy Name field.
3 Type a starting IP address in the IP Network Address field.
4 Type a subnet mask value in the Subnet Mask field in the form 255.255.255.0.
5In the Port Range/Port Number field, optionally enter a port range or an individual port.
6In the Service drop-down list, click on a service option.
7In the Status drop-down list, click on an access action, either Allow or Deny.
8Click Accept.
Adding a Policy for All Addresses
1In the Apply Policy to field, select the All Addresses option.
2 Define a name for the policy in the Policy Name field.
3The IP Address Range field is read-only, specifying All IP Addresses.
4In the Service drop-down list, click on a service option.
5In the Status drop-down list, click on an access action, either Allow or Deny.
6Click Accept.
Setting File Shares Access Policies
To set file share access policies:
1 Navigate to Users > Local Users.
2 Click the configure icon next to the user you want to configure.
3 Select the Policies tab.
4Click Add Policy.
5Select Server Path from the Apply Policy To drop-down list.
To Next Page
Loading...
