Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
354
Adding a Policy for an IPv6 Address
To add a policy for an IPv6 address:
1 Navigate to Users > Local Users.
2 Click the configure icon next to the user you want to configure.
3 Select the Policies tab.
4Click Add Policy...
5In the Apply Policy To field, click the IPv6 Address option.
6 Define a name for the policy in the Policy Name field.
7 Type an IPv6 address in the IPv6 Address field in the form 2001::1:2:3:4.
8In the Port Range/Port Number field, optionally enter a port range or an individual port.
9In the Service drop-down list, click on a service object.
10 In the Status drop-down list, click on an access action, either Allow or Deny.
11 Click Accept.
Adding a Policy for an IPv6 Address Range
To add a policy for an IPv6 address range:
1In the Apply Policy To field, click the IPv6 Address Range option.
2 Define a name for the policy in the Policy Name field.
3 Type a starting IPv6 address in the IPv6 Network Address field.
4 Type a prefix value in the IPv6 Prefix field, such as 64 or 112.
5In the Port Range/Port Number field, optionally enter a port range or an individual port.
6In the Service drop-down list, click on a service option.
7In the Status drop-down list, click on an access action, either Allow or Deny.
8Click Accept.
Adding a Policy for All IPv6 Addresses
To add a policy for all IPv6 addresses:
1In the Apply Policy To field, select the All IPv6 Address option.
2 Define a name for the policy in the Policy Name field.
3The IPv6 Address Range field is read-only, specifying all IPv6 addresses.
4In the Service drop-down list, click on a service option.
5In the Status drop-down list, click on an access action, either Allow or Deny.
6Click Accept.
Adding or Editing User Bookmarks
The Bookmarks tab provides configuration options to add and edit user bookmarks. In addition to the main
procedure that follows, see the following:
NOTE: Entries in the URL field cannot contain (“http://,” “https://”) elements. Entries can also not
contain fragment delimiters such as “#.”
To Next Page
Loading...
