Dell Vostro 3425 - Installing the Edp Cable (Aluminum)

3. Remove the base cover.
4. Remove the memory modules.
5. Remove the SSD.
6. Remove the wireless card.
7. Remove the display assembly.
8. Remove the hinge caps.
9. Remove the display bezel.
10. Remove the hinges.
11. Remove the display panel.
About this task
The following image indicates the location of the eDP cable (in a system shipped with an aluminum chassis) and provides a visual
representation of the removal procedure.
Steps
1. Disconnect the eDP cable from the camera.
2. Peel and remove the eDP cable from the display cover.
Installing the eDP cable (Aluminum)
About this task
The following image indicates the location of the eDP cable (in a system shipped with an aluminum chassis) and provides a visual
representation of the installation procedure.
68
Removing and installing components