Steps
1. Align the tabs on the right-side cover with the slots on the chassis and slide it towards the front of the computer.
2. Replace the two screws (6-32) that secure the right-side cover to the chassis.
Next steps
1. Follow the procedure in After working inside your computer.
Front bezel
Removing the front cover
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the right-side cover.
About this task
The following images indicate the location of the front cover and provide a visual representation of the removal procedure.
Disassembly and reassembly
11
To Next Page
Loading...
