Steps
1. Align the graphics card with the PCI-Express card connector on the system board.
NOTE: To install the NVIDIA GeForce RTX 2080 graphics card, rotate and install the graphics card.
2. Using the alignment post, connect the card in the connector and press down firmly. Ensure that the card is firmly seated.
3. Lift the pull tab to close the PCIe door.
Next steps
1. Install the .
2. Follow the procedure in .
Hard disk drive
Removing the 2.5-inch hard drive assembly
Prerequisites
1. Follow the procedure in Before working inside your computer.
Disassembly and reassembly
21
To Next Page
Loading...
