3. Slide the hard-drive assembly into the hard-drive cage until it snaps into place.
4. Connect the data cable and power cable to the hard drive.
Next steps
1. Install the right-side cover.
2. Follow the procedure in After working inside your computer.
Removing the 3.5-inch hard drive
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the right-side cover.
About this task
The following images indicate the location of the 3.5-inch hard drive and provide a visual representation of the removal procedure.
Disassembly and reassembly
25
To Next Page
Loading...
