Base Cover 13
3
Base Cover
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. For additional safety best practices information, see the Regulatory
Compliance Homepage at dell.com/regulatory_compliance.
Removing the Base Cover
1
Close the display and turn the computer over.
2
Using the Torx 5 screwdriver, remove the ten screws that secure the base
cover to the palm-rest assembly.
3
Using your fingertips, lift the base cover starting from the back of your
computer.
4
Remove the base cover off the palm-rest assembly.
Spyder_OM_Book.book Page 13 Monday, January 16, 2012 11:02 AM
To Next Page
Loading...
