Power-Adapter Connector 39
7
Remove the screw that secures the power-adapter connector to the palm-
rest assembly.
8
Lift the power-adapter connector away from the palm-rest assembly.
Replacing the Power-Adapter Connector
1
Route the Mini-Card cables through the routing guides.
2
Slide the touchpad cable into the system-board connector and press down
on the connector latch to secure the keyboard cable.
3
Connect the Mini-Card cables to the connectors on the Mini-Card.
1 routing guides 2 screw
3 power-cord connector
Spyder_OM_Book.book Page 39 Monday, January 16, 2012 11:02 AM
To Next Page
Loading...
