Speakers 21
3
Lift the right speaker from the palm-rest assembly.
Replacing the Speakers
Left Speaker
1
Align the screw holes on the left-speaker with the screw holes on the palm-
rest assembly.
2
Replace the two screws that secure the left speaker.
3
Route the Mini-Card cables through the routing guide on the left speaker.
4
Connect the left-speaker cable to the I/O board connector.
5
Connect the I/O cable to the I/O board connector and system-board
connector.
1 right-speaker cable 2 screws (2)
Spyder_OM_Book.book Page 21 Monday, January 16, 2012 11:02 AM
To Next Page
Loading...
