40 Power-Adapter Connector
4
Align the screw hole on the power-adapter connector with the screw hole
on the palm-rest assembly.
5
Route the power-adapter connector cable through the routing guides.
6
Connect the power-adapter connector cable to the system-board
connector.
7
Replace the screw that secures the power-adapter connector to the palm-
rest assembly.
Postrequisites
1
Replace the right speaker. See "Replacing the Speakers" on page 21
2
Replace the battery. See "Replacing the Battery" on page 18
3
Replace the base cover. See "Replacing the Base Cover" on page 14
4
Follow the instructions in "After Working Inside Your Computer" on
page 11.
Connectors on the Mini-Card Mini-Card Cable Color
Scheme
WLAN + Bluetooth (2 cables)
Main WLAN + Bluetooth (white triangle)
Auxiliary WLAN + Bluetooth (black triangle)
white
black
Spyder_OM_Book.book Page 40 Monday, January 16, 2012 11:02 AM
To Next Page
Loading...
