Power-Adapter Connector 37
11
Power-Adapter Connector
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. For additional safety best practices information, see the Regulatory
Compliance Homepage at dell.com/regulatory_compliance.
Prerequisites
1
Remove the base cover. See "Removing the Base Cover" on page 13
2
Remove the battery. See "Removing the Battery" on page 17
3
Remove the left speaker. See "Removing the Speakers" on page 19
Removing the Power-Adapter Connector
1
Disconnect the I/O cable from the I/O board connector and system-board
connector.
Spyder_OM_Book.book Page 37 Monday, January 16, 2012 11:02 AM
To Next Page
Loading...
