Fan 35
Replacing the Fan
1
Align the screw holes on the fan with the screw holes on the palm-rest
assembly.
2
Replace the two screws that secure the fan to palm-rest assembly.
3
Connect the fan cable to the I/O board connector.
4
Connect the power-adapter connector cable to the system-board
connector.
5
Connect the I/O cable to the I/O board connector and system-board
connector.
Postrequisites
1
Replace the battery. See "Replacing the Battery" on page 18
2
Replace the base cover. See "Replacing the Base Cover" on page 14
1 fan cable 2 screws (2)
3fan
Spyder_OM_Book.book Page 35 Monday, January 16, 2012 11:02 AM
To Next Page
Loading...
