52 Coin-Cell Battery
Replacing the Coin-Cell Battery
1
With the positive-side facing up, snap the coin-cell battery into the battery
socket on the system board.
Postrequisites
1
Replace the system board. See "Replacing the System Board" on page 48
2
Replace the fan. See "Replacing the Fan" on page 35
3
Replace the heat sink. See "Replacing the Heat Sink" on page 32
4
Replace the hard drive. See "Replacing the Solid-State Drive" on page 29
5
Replace the Mini-Card. See "Replacing the Mini-Card" on page 25
6
Replace the battery. See "Replacing the Battery" on page 18
7
Replace the base cover. See "Replacing the Base Cover" on page 14
8
Follow the instructions in "After Working Inside Your Computer" on
page 11.
1 system board 2 coin-cell battery
3 plastic scribe
Spyder_OM_Book.book Page 52 Monday, January 16, 2012 11:02 AM
To Next Page
Loading...
