18 Battery
Replacing the Battery
1
Align the screw holes on the battery with the screw holes on the palm-rest
assembly.
2
Replace the eight screws that secure the battery to the palm-rest assembly.
3
Connect the battery cable to the system-board connector.
Postrequisites
1
Replace the power-light board. See "Replacing the Power-Light Board" on
page 16
2
Replace the base cover. See "Replacing the Base Cover" on page 14
3
Follow the instructions in "After Working Inside Your Computer" on
page 11
1 screws (8) 2 battery
3 battery cable
Spyder_OM_Book.book Page 18 Monday, January 16, 2012 11:02 AM
To Next Page
Loading...
