I/O Board 41
12
I/O Board
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. For additional safety best practices information, see the Regulatory
Compliance Homepage at dell.com/regulatory_compliance.
Prerequisites
1
Remove the base cover. See "Removing the Base Cover" on page 13
2
Remove the battery. See "Removing the Battery" on page 17
3
Remove the right speaker. See "Removing the Speakers" on page 19
4
Remove the fan. See "Removing the Fan" on page 33
5
Remove the power-adapter connector. See "Removing the Power-Adapter
Connector" on page 37
Removing the I/O Board
1
Remove the screw that secures the I/O board to the palm-rest assembly.
2
Lift the I/O board away from the palm-rest assembly.
Spyder_OM_Book.book Page 41 Monday, January 16, 2012 11:02 AM
To Next Page
Loading...
