Chapter 8 ParametersASDA-A2R Series
8-154 Revision December, 2014
Format:
DEC
Settings:
The default value of this parameter is smaller (short deceleration
time) and it is used for deceleration time setting of auto protection.
P5-35 AC15
Acceleration/Deceleration Time (Number
#15)
Address: 0546H
0547H
Operational
Interface:
Panel / Software Communication
Related Section:
7.10
Default:
30
Control
Mode:
PR
Unit:
ms
Range:
1 ~ 65500
Data Size:
16bit
Format:
DEC
Settings:
The default value of this parameter is smaller (short deceleration
time) and it is used for short deceleration time and stops promptly
of auto protection.
P5-36 CAST CAPTURE - Start Address of Data Array
Address: 0548H
0549H
Operational
Interface:
Panel / Software Communication
Related Section:
7.11.1
Default:
0
Control
Mode:
ALL
Unit:
-
Range:
0 ~ (value set by P5-10 minus 1)
Data Size:
16bit
Format:
DEC
Settings:
The first data CAPTURE obtained should be saved in the address
of data array.
NOTE
It is writable only when COMPARE stops (please refer to P5-39)