Delta ASDA-M Series User Manual

ASDA-M Chapter 8 Parameters
Revision December, 2014 8-13
Alarm of Servo Drive
001：Over current
002：Over voltage
003：Under voltage (In default setting, the alarm occurs only when
the voltage is not enough in Servo ON status; In Servo ON
status, when it applies to power R, S, T, the alarm still will not
be cleared. Please refer to P2-66.)
004：Motor combination error (The drive corresponds to the wrong
motor)
005：Regeneration error
006：Over load
007：Over speed

Delta ASDA-M Series Specifications

General

Brand	Delta
Model	ASDA-M Series
Category	Servo Drives
Language	English