Delta ASDA-M Series

Chapter 8 Parameters ASDA-M
8-22 Revision December, 2014
Unit：
-
Range：
-
Data Size：
32bit
Format：
DEC
Settings：
The setting value which is set by P0-19 should be monitored via
P0-11. (Please refer to Chapter 7.2.1, Description of Monitor
Variable for the setting value.) Set P0-02 to 25, the panel displays
VAR-3 first, and then shows the content of P0-11.
P0-12★
CM4 Status Monitor Register 4
Address: 0018H
0019H
Parameter
Attribute：
Parameter for individual axis
Related Section:
Section 4.3.5
Operational
Interface：
Panel / Software Communication
Default：
-
Control
Mode：
ALL
Unit：
-
Range：
-
Data Size：
32bit
Format：
DEC
Settings：
The setting value which is set by P0-20 should be monitored via
P0-12. (Please refer to Chapter 7.2.1, Description of Monitor
Variable for the setting value.) Set P0-02 to 26, the panel displays
VAR-4 first, and then shows the content of P0-12.
P0-13★
CM5 Status Monitor Register 5
Address: 001AH
001BH
Parameter
Attribute：
Parameter for individual axis
Related Section:
Section 4.3.5
Operational
Interface：
Panel / Software Communication
Default：
-
Control
Mode：
ALL
Unit：
-