Chapter 8 Parameters ASDA-M
8-78 Revision December, 2014
P1-80 OVLPL The setting of the overlap PR path
Address: 01A0H
01A1H
Parameter
Attribute：
Parameter for three axes
Related Section: -
Operational
Interface：
Panel / Software Communication
Default：
100000
Control
Mode：
PR
Unit：
-
Range：
1000 ~ 2147483647
Data Size：
32bit
Format：
DEC
Settings：
This parameter is for setting the
deceleration area of previous path during
the PR path overlap.
To Next Page
Loading...
