Delta DTM Series - Page 100

Chapter 7:Appendix
DTM temperature controller operating manual
7-36
 IP Filter Protection
Application
Setting up IP filter protection
Steps
(1) IP of DTMEXX: 192.168.0.4
(2) Only allow 192.168.0.7 and 172.16.0.1~172.16.0.254 to establish
1. See 7.3.1 for the connection and communication settings.
2. Open the setup page for DTMEXX and switch to “IP Filter” page.
3. Check “Enable IP Filter”. Enter “192.168.0.7” in No. 1 Begin IP Address and “192.168.0.7” in End
IP Address.