Delta DTM Series - Purchase Information

Chapter 1: Product Introduction
DTM temperature controller operating manual
1-3
1.4 Purchase Information
Series name
Deltas DTM series temperature controller (includes side protective cover)
1 Communications
interface
R = USB + RS485
E = Ethernet + RS485
2 Number of input
channels
04 = 4 channel
08 = 8 channel
3 Derivative device
types
Blank = standard product
Series name
Delta DTM series temperature control measurement expansion module
1 Communications
interface
N = None (N is the measurement expansion module without external
communications)
2 Number of input
channels
Code 1 = N
02 = 2 channel
04 = 4 channel
08 = 8 channel
3 Optional functions
Only Code 2 = 02 has the following selection,
- C = 4CH linear current output (source type)
- L = 4CH linear voltage output
- R = 4CH relay output
- V = 4CH DC voltage pulse output (source type)
Series name
Delta DTM series temperature control accessories
1 Module type
BD = expansion cassette
DO = output expansion module
CT = CT sensor input
2 Specifications
Code 1 = BD device type:
C = 4CH linear current output (source type)
L = 4CH linear voltage output
R = 4CH relay output
V = 4CH pulse volt output (source type)
Code 1 = DO device type:
C = 8CH linear current output (source type)
L = 8CH linear voltage output
R = 8CH relay output
V = 8CH pulse volt output (source type)
X = 16CH open drain output
Code 1 = CT device type:
030 = 30A (default input range), 8CH CT input
(CT sensor is an optional accessory)
 Notes:
1. The standard configuration of the DTM host and measurement expansion module at time of shipping has no
expansion cassette, which may be selected by the customer.
2. DTM series comes with all needed cord-end terminals.