Delta DTM Series - Page 69

Chapter 7: Appendix
DTM temperature controller operating manual
7-5
Name
Description
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
ALM1 min.
Record lowest
alarm value
Hx988 Hx989 Hx98A Hx98B Hx98C Hx98D Hx98E Hx98F
ALM2 max.
Record highest
alarm value
Hx990 Hx991 Hx992 Hx993 Hx994 Hx995 Hx996 Hx997
ALM2 min.
Record lowest
alarm value
Hx998 Hx999 Hx99A Hx99B Hx99C Hx99D Hx99E Hx99F
ALM3 max.
Record highest
alarm value
Hx9A0 Hx9A1 Hx9A2 Hx9A3 Hx9A4 Hx9A5 Hx9A6 Hx9A7
ALM3 min.
Record lowest
alarm value
Hx9A8 Hx9A9 Hx9AA Hx9AB Hx9AC Hx9AD Hx9AE Hx9AF
Name
Address
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
Channel disable
(0
: disable,
1
: enable)
Hx258
Bit0
Bit1
Bit2
Bit3
Bit4
Bit5
Bit6
Bit7
Temperature
scale
(0
: °F、1: °C)
Hx259
Bit0
Bit1
Bit2
Bit3
Bit4
Bit5
Bit6
Bit7
Cold junction
compensation
select
*4
Hx260
Host:
H0000:CH1 ~ CH8 are all used
internal cold junction compensation
(factory default).
H00
X1: the CH1 of the internal station number X is the external cold
junction temperature, and the remaining channels are all used the
CH1
temperature value of
the internal station number X as the external cold
junction compensation.
H00
X2: the CH2 of the internal station number X is the external cold
junction temperature, and the remaining channels are all used the CH
2
temperature value of the internal station number X as the external cold
junction compensation.
H00
X3: the CH3 of the internal station number X is the external cold
junction temperature, and the remaining channels are all used the CH
3
temperature value of the internal station number X as the external cold
junction compensation.
H00
X4 = the CH4 of the internal station number X is the external cold
junction temperature, and the remaining channels are all used the CH
4
temperature value of the internal station number X as the external cold
junction compensation.
H00
X5 = the CH5 of the internal station number X is the external cold
junction temperature, and the remaining channels are all used the CH
5
temperature value of the internal station number X as the external cold
junction compensation.
H00
X6 = the CH6 of the internal station number X is the external cold
junction temperature, and the remaining channels are all used the CH
6
temperature value of the internal station number X as the external cold
junction compensation.
H00
X7 = the CH7 of the internal station number X is the external cold
junction temperature, and the remaining channels are all used the CH
7
temperature value of the internal station number X as the external cold
junction compensation.
H00
X8 = the CH8 of the internal station number X is the external cold
junction tem
perature, and the remaining channels are all used the CH8
temperature value of the internal station number X as the external cold
junction compensation.