Delta DVP-PLC User Manual

2 Functions of Devices in DVP-PLC
DVP-PLC Application Manual
2-36
Special
M
Function
ES
EX
SS
SA
SX
SC
EH
EH2
SV
Off
Ø
On
STOP
Ø
RUN
RUN
Ø
STO
P
Attribute Latched Default
M1056
Inhibiting I6□□ ○ ○
╳
Off - - R/W NO Off
M1057
Inhibiting I7□□
╳
○
╳
Off - - R/W NO Off
M1059 Inhibiting I010 ~ I060
╳
○ ╳
Off - - R/W NO Off
M1060 System error message 1
○ ○ ○
Off - - R NO Off
M1061 System error message 2
○ ○ ○
Off - - R NO Off
M1062 System error message 3
○ ○ ○
Off - - R NO Off
M1063 System error message 4
○ ○ ○
Off - - R NO Off
M1064 Incorrect use of operands
○ ○ ○
Off Off - R NO Off
M1065 Syntax error
○ ○ ○
Off Off - R NO Off
M1066 Loop error
○ ○ ○
Off Off - R NO Off
M1067* Calculation error
○ ○ ○
Off Off - R NO Off
M1068* Calculation error locked (D1068)
○ ○ ○
Off - - R NO Off
M1070
ES/SA: Y1 time base switching for PWM instruction
(On: 100us; Off: 1ms)
EH/EH2/SV: Y0 time base switching for PWM
instruction (On: 100us; Off: 1ms)
EH_V1.2 and above/EH2/SV: when On, D1371 will
decide the time base)
○ ○ ○
Off - - R/W NO Off
M1071
Y2 time base switching for PWM instruction (On:
100us; Off: 1ms)
EH_V1.2 and above/EH2/SV: when On, D1372 will
decide the time base)
╳ ╳
○
Off - - R/W NO Off
M1072 Executing PLC RUN instruction
○ ○ ○
Off On Off R/W NO Off
M1075 Error occurring when writing FLASH card
╳ ╳
○
Off - - R NO Off
M1076* Real time clock malfunction
╳
○ ○
Off - - R NO Off
M1077 Battery in low voltage, malfunction or no battery
╳
○ ○
Off - - R NO Off
M1078
Immediately stopping Y0 pulse output for PLSY
instruction
○ ○
╳
Off - - R/W NO Off
M1079
Immediately stopping Y1 pulse output for PLSY
instruction
○ ○
╳
Off - - R/W NO Off
M1080 Requesting COM2 monitoring
○ ○ ○
Off - - R NO Off
M1081 Changing direction for FLT instruction
╳
○ ○
Off - - R/W NO Off
M1082 Real time clock has been changed
╳
○ ○
Off - - R NO Off
M1083
Allowing interruption subroutine in FROM/TO
instructions
╳
○ ○
Off - - R/W NO Off
M1084*
Detecting bandwidth (only available in
ES/EX/SS_V6.4, SA/SX_V1.6, SC_V1.4 and above)
○ ○
╳
Off Off Off R/W NO Off

Delta DVP-PLC Specifications

General

Manufacturer	Delta Electronics
Model	DVP-PLC
Category	Controller
Humidity	5% to 95% RH, non-condensing
Programming Language	Ladder Diagram (LD), Instruction List (IL), Sequential Function Chart (SFC)
CPU Type	Various, depending on the specific model within the DVP series (e.g., ES2, EX2, SX2, SA2, EH3, etc.)
Operating Temperature	Typically 0°C to 55°C (32°F to 131°F)
Storage Temperature	Typically -25°C to 70°C (-13°F to 158°F)