Delta DVP-PLC User Manual

2 Functions of Devices in DVP-PLC
DVP-PLC Application Manual
2-44
Special
M
Function
ES
EX
SS
SA
SX
SC
EH
EH2
SV
Off
Ø
On
STOP
Ø
RUN
RUN
Ø
STO
P
Attribute Latched Default
M1303 High/low bits exchange for XCH instruction
╳
○ ○
Off - - R/W NO Off
M1304* Enabling force On/Off of input point X
╳
○ ○
Off - - R/W NO Off
M1305
Reverse operation of the 1
st
group pulse CH0 (Y0,
Y1) for PLSV/DPLSV/DRVI/DDRVI/DRVA/DDRVA
instruction
╳ ╳
○
Off - - R NO Off
M1306
Reverse operation of the 2
nd
group pulse CH1 (Y2,
Y3) for PLSV/DPLSV/DRVI/DDRVI/DRVA/DDRVA
instruction
╳ ╳
○
Off - - R NO Off
M1310*
Immediately disabling Y10 pulse output (for
SC_V1.4 and above)
╳
○
╳
Off Off - R/W NO Off
M1311* Disabling Y11 pulse output (for SC_V1.4 and above)
╳
○
╳
Off Off - R/W NO Off
M1312 Controlling start input point of C235
╳ ╳
○
Off - - R/W NO Off
M1313 Controlling start input point of C236
╳ ╳
○
Off - - R/W NO Off
M1314 Controlling start input point of C237
╳ ╳
○
Off - - R/W NO Off
M1315 Controlling start input point of C238
╳ ╳
○
Off - - R/W NO Off
M1316 Controlling start input point of C239
╳ ╳
○
Off - - R/W NO Off
M1317 Controlling start input point of C240
╳ ╳
○
Off - - R/W NO Off
M1320 Controlling reset input point of C235
╳ ╳
○
Off - - R/W NO Off
M1321 Controlling reset input point of C236
╳ ╳
○
Off - - R/W NO Off
M1322 Controlling reset input point of C237
╳ ╳
○
Off - - R/W NO Off
M1323 Controlling reset input point of C238
╳ ╳
○
Off - - R/W NO Off
M1324 Controlling reset input point of C239
╳ ╳
○
Off - - R/W NO Off
M1325 Controlling reset input point of C240
╳ ╳
○
Off - - R/W NO Off
M1328 Enabling start/reset of C235
╳ ╳
○
Off - - R/W NO Off
M1329 Enabling start/reset of C236
╳ ╳
○
Off - - R/W NO Off
M1330 Enabling start/reset of C237
╳ ╳
○
Off - - R/W NO Off
M1331 Enabling start/reset of C238
╳ ╳
○
Off - - R/W NO Off
M1332 Enabling start/reset of C239
╳ ╳
○
Off - - R/W NO Off
M1333 Enabling start/reset of C240
╳ ╳
○
Off - - R/W NO Off
M1334*
EH/EH2/SV: stopping the 1
st
group pulse output
CH0 (Y0, Y1)
SC_V1.4 and above: selecting Y10 pulse output
stop modes
╳
○ ○
Off - - R/W NO Off
M1335*
EH/EH2/SV: stopping the 2
nd
group pulse output
CH1 (Y2, Y3)
SC_V1.4 and above: selecting Y11 pulse output
stop modes
╳
○ ○
Off - - R/W NO Off

Delta DVP-PLC Specifications

General

Manufacturer	Delta Electronics
Model	DVP-PLC
Category	Controller
Humidity	5% to 95% RH, non-condensing
Programming Language	Ladder Diagram (LD), Instruction List (IL), Sequential Function Chart (SFC)
CPU Type	Various, depending on the specific model within the DVP series (e.g., ES2, EX2, SX2, SA2, EH3, etc.)
Operating Temperature	Typically 0°C to 55°C (32°F to 131°F)
Storage Temperature	Typically -25°C to 70°C (-13°F to 158°F)