Delta DX-2300 Series User Manual

DX-2300 Series Industrial Ethernet Cloud Router
3-8
_3
Description Default
 Dynamic: DHCP (Dynamic Host Configuration Protocol) server on the
network will assign an IP address to the DX router automatically.
 Manual: Manually set up the IP address (Static).
IP Address
Set up an IP address for your device to connect to the internet via the WAN
port. It’s configurable when the mode is set to Static.
0.0.0.0
Network Mask
Set up the WAN network mask. It’s configurable when the mode is set to
Static.
0.0.0.0
Gateway Address
Set up the gateway address. It’s configurable when the mode is set to Static. 0.0.0.0
MTU
Maximum Transmission Unit is the largest packet that can be transmitted
over packet based networks.
1500
Retrieve DNS Address By
The Retrieve DNS Address Method is the same as the WAN Connection
Mode that you have set. You can apply to different option by modifying the
WAN Connection Mode.
DNS address can be retrieved by DHCP setup or manually set.
 Dynamic: DHCP (Dynamic Host Configuration Protocol) server on the
network will assign an DNS address to the DX router automatically.
 Manual: Manually set up the IP address (Static).
DHCP
Primary DNS
Set up the primary DNS. It’s configurable when the mode is set to Static. 0.0.0.0
Secondary DNS
Set up the secondary DNS. It’s configurable when the mode is set to Static. 0.0.0.0

Delta DX-2300 Series Specifications

General

Brand	Delta
Model	DX-2300 Series
Category	Network Router
Language	English