eZV-440 Application Guide
Edition 2.6
Page 83 of 84
Document Revision History
Document
Edition
Number
Date
Published
Change Description
1.0 October 1,
2014
First publication.
1.1 November
27, 2016
Added more information about programmable controller pro-
grams in the Configurable and Programmable section. Added
the variables used to override the algorithm. Deleted the config
graphic warning. Added GCL+ limitations and a new appendix
C.
1.2 February
3, 2015
Removed the word "hybrid".
2.0 April 2,
2015
New screenshots and content about the new firmware version
2.01 and 2.02 and new config graphic B-91035.3. Deleted ref-
erences to Flow Failure Damper Position field in the config
graphic. New Air Balancing tab on the config graphic. Deleted
Appendix C about supported and unsupported GCL functions.
Refer users to KBA 2137. Firmware 2.0.2 algorithm changes
documented.
Minor
update to
2.0
April 27,
2015
In the Alarming section, added an update about custom alarm
messages.
2.1 June 4,
2015
Added a section about data exchange.
2.2 June 8,
2015
New content to the data exchange section. Also added a note in
the LINKnet section about lack of support for DFM I/O modules.
2.3 June 24,
2016
Added open source licensing appendix.
To Next Page
Loading...
