Delta ME300 Series - Page 149

Chapter 10 Digital Keypad
ME300
10-4
General Mode 2
(maximum operation frequency Pr.01-00 is 3 digits; for example Pr.01-00 = 599.0 Hz)
3. Application Selection Page
The Application Selection page displays “APP”, but does not show the APP page when Pr.13-00 = 0.
The description of Pr.13-00 setting is as follows:
Pr.13-00 = 0 specifies the application selection is inactive and does not show on the display.
Pr.13-00 = 1 specifies a user-defined application, and the keypad displays “USER”.
Pr.13-00 = 3 specifies the Fan application, and the keypad displays “FAN”.
Pr.13-00 = 4 specifies the Pump application, and the keypad displays “PUMP”.
Pr.13-00 = 5 specifies the Conveyor application, and the keypad displays “CnYr”.
Pr.13-00 = 7 specifies the Packing application, and the keypad displays “PACK”.