Delta UNISAW User Manual

TABLE OF CONTENTS
SAFETY RULES FOR ALL TOOLS.3
ADDITIONAL SAFETY RULES FOR CIRCULAR SAWS.4
UNPACKING AND CLEANING.5
ASSEMBLY INSTRUCTIONS
Assembling Starter Box To Cabinet.7
Assembling On/Off Switch.8
Assembling Extension Wing.8
Assembling Guide Rails.9
Assembling Blade Guard And Splitter Assembly.10
Fastening Motor Cord And Switch Cord To Saw Frame.13
Assembling Motor Cover.13
Assembling Miter Gage And Wrench Holder Brackets.14
Assembling Rip Fence Holder Brackets.14
Attaching Literature Holder To Saw Cabinet.14
CONNECTING SAW TO POWER SOURCE
Grounding Instructions.16
SINGLE PHASE OPERATION
Three Horsepower Motors.16
Five Horsepower Motors.17
THREE PHASE OPERATION.17
MAGNETIC PUSH BUTTON CONTROLS.17
OPERATING CONTROLS AND ADJUSTMENTS
Starting And Stopping The Saw.17
Locking Switch In The “OFF” Position.17
Blade Raising Mechanism.18
Blade Tilting Mechanism.18
Adjusting 90 And 45 Degree Stops.19
Adjusting Table.19
Rip Fence Operation And Adjustments.20
Adjusting Table Insert.20
Miter Gage Operation And Adjustment.21
MAINTENANCE
Changing The Saw Blade.22
Replacing Belts And Adjusting Belt Tension.22
OPERATION.22
Cross-Cutting.23
Ripping.24
Using Accessory Moulding Cutterhead.24
Using Accessory Dado Head.26
Using Auxiliary Wood Facing On Rip Fence.27
CONSTRUCTING A PUSH STICK.27
PARTS, SERVICE OR WARRANTY ASSISTANCE.28
WARRANTY.28
2

Delta UNISAW Specifications

General

Brand	Delta
Model	UNISAW
Category	Saw
Language	English