Denon AVR-1312 User Manual

52
Surround
Surround mode (vpage21)
Audio Adjust (vpage38)
Tone
(vpage40)
RESTORER z7
(vpage41)
AFDM z6
(vpage39)
SB CH OUT
(vpage39)
Subwoofer
(vpage39)
PRO LOGIC g/gx Music mode only
NEO:6 Music mode only
Panorama
(vpage39)
Dimension
(vpage39)
Center Width
(vpage39)
Center Image
(vpage39)
DIRECT (2 channel)
S
z2
DIRECT (Multi-channel)
STEREO
S S
MULTI CH IN
S S S
DOLBY PRO LOGIC gx S S S S S S
DOLBY PRO LOGIC g S S S S S S
DTS NEO:6
S S S S
DOLBY DIGITAL
S S S
DOLBY DIGITAL Plus
S S S
DOLBY TrueHD
S S
DTS SURROUND
S S S
DTS 96/24
S S S
DTS-HD
S S
DTS Express
S S S
MULTI CH STEREO
S S S
VIRTUAL
S S
z2 Only when “SW Mode” is set to “LFE+Main” (C page 6 “Bass Setting”), sound is output from the subwoofer.
z6 This item can be selected when a Dolby Digital or DTS or DVD-Audio signal is played.
z7 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
Basic version
Advanced version
InformationInformation

Denon AVR-1312 Specifications

General

Number of Channels	5.1
HDMI Inputs	4
HDMI Outputs	1
Amplification Type	Discrete
Input Sensitivity	200 mV
Frequency Response	10 Hz - 100 kHz (+1, -3 dB)
Signal-To-Noise Ratio	98 dB
Digital Optical Inputs	2
Coaxial Digital Input	1
Analog Audio Inputs	4
Headphone Jack	Yes
Tuner Presets	56
Dimensions (W x H x D)	434 x 151 x 319 mm
Amplifier Type	Discrete
Tuner Type	AM/FM
Preset Stations	56
Remote Control	Yes
Dolby Technologies	Dolby Digital Plus, Dolby Pro Logic II, Dolby TrueHD
DTS Technologies	DTS-HD Master Audio
Output Power / Channel	75 W (8 Ohms, 20 Hz - 20 kHz, 2 channels driven, THD 0.08%)
Input Impedance	47 kOhms
Audio Inputs	2 Optical, 1 Coaxial, 4 Analog
Power Output	75W per channel (8 ohms, 20Hz-20kHz, 0.08% THD)