Denon AVR-1312 - User Manual

Other manuals for Denon AVR-1312

Service Manual110 pages

Getting Started81 pages

Manual17 pages

Brochure & Specs2 pages

Antes De Empezar16 pages

Manual Del Usuario63 pages

Mise En Route16 pages

Questions and Answers:

D
Denise MorganSep 1, 2025
Why is the power indicator blinking red on my Denon Stereo Receiver?
- K
  Kristi WintersSep 1, 2025
  The power indicator might blink red on your Denon Stereo Receiver due to several reasons: * The unit's internal temperature has risen. Turn off the power and allow the unit to cool down before turning it back on. * The unit may not have sufficient ventilation. Re-install the unit in a location with better ventilation. * The connected speakers may not have the specified impedance. Use speakers that meet the specified impedance. * The speaker cable may have a short circuit. Ensure the core wire in the speaker cable is firmly twisted and properly re-connected to the speaker terminal.
R
Richard MoranSep 2, 2025
How to fix no video output with HDMI connection on Denon AVR-1312 Stereo Receiver?
- S
  Sabrina OwensSep 2, 2025
  If you're experiencing no video output with an HDMI connection on your Denon Stereo Receiver: * Check the HDMI connector connections. * Ensure the input source matches the connected HDMI connector. * Verify that your TV is compatible with copyright protection (HDCP). Incompatible devices may prevent correct video output.
C
Casey GreenSep 2, 2025
How to fix no audio output with HDMI connection on Denon AVR-1312?
- P
  pughhayleySep 2, 2025
  If you're not getting audio output with an HDMI connection on your Denon Stereo Receiver: * Check the connection of the HDMI connectors. * If you want audio from the speakers, set “HDMI Audio Out” on the menu to “Amp”. * If you want audio from the TV, set “HDMI Audio Out” on the menu to “TV”.
J
joe48Sep 3, 2025
What to do if no picture appears on my Denon AVR-1312?
- J
  Joseph ParkSep 3, 2025
  If no picture appears on your Denon Stereo Receiver: * Check the TV connection. * Set the TV input correctly.
C
christopherperezSep 4, 2025
What to do if my iPod cannot be played on Denon Stereo Receiver?
- S
  Stephen MaloneSep 4, 2025
  If your iPod cannot be played on the Denon Stereo Receiver: * Verify the iPod connections. * Ensure the AC adapter of the iPod control dock is plugged into the power outlet. * Switch the input source to “DOCK”.
C
Catherine ChangSep 5, 2025
What does 'Connection Error' mean on my Denon AVR-1312 when using iPod?
- D
  David GoodwinSep 5, 2025
  If you see a 'Connection Error' displayed on your Denon Stereo Receiver when using an iPod, it indicates a communication problem. Try turning off the power to the unit, disconnecting the iPod, and then reconnecting it.
G
Gerald VasquezSep 6, 2025
What does 'Not Support' message mean on my Denon Stereo Receiver when using iPod?
- J
  James JacksonSep 6, 2025
  If the 'Not Support' message is displayed on your Denon Stereo Receiver when connecting an iPod, it could be due to: * Incompatible iPod: Ensure the iPod you are connecting is compatible with the unit. * Outdated software: Update the iPod's software to the latest version.
V
Victoria StuartSep 6, 2025
What to do if the Denon AVR-1312 cannot be operated with the remote control?
- J
  Jennifer TorresSep 7, 2025
  If your Denon Stereo Receiver isn't responding to the remote control: * Replace the batteries with new ones. * Ensure you're within 7 meters and within a 30° angle of the unit. * Remove any obstacles between the unit and the remote. * Verify the batteries are inserted correctly, matching the polarity marks. * Move the unit away from strong light sources like direct sunlight or inverter-type fluorescent lights.

Denon AVR-1312 Specifications

General

Number of Channels	5.1
HDMI Inputs	4
HDMI Outputs	1
Amplification Type	Discrete
Input Sensitivity	200 mV
Frequency Response	10 Hz - 100 kHz (+1, -3 dB)
Signal-To-Noise Ratio	98 dB
Digital Optical Inputs	2
Coaxial Digital Input	1
Analog Audio Inputs	4
Headphone Jack	Yes
Tuner Presets	56
Dimensions (W x H x D)	434 x 151 x 319 mm
Amplifier Type	Discrete
Tuner Type	AM/FM
Preset Stations	56
Remote Control	Yes
Dolby Technologies	Dolby Digital Plus, Dolby Pro Logic II, Dolby TrueHD
DTS Technologies	DTS-HD Master Audio
Output Power / Channel	75 W (8 Ohms, 20 Hz - 20 kHz, 2 channels driven, THD 0.08%)
Input Impedance	47 kOhms
Audio Inputs	2 Optical, 1 Coaxial, 4 Analog
Power Output	75W per channel (8 ohms, 20Hz-20kHz, 0.08% THD)