Ill Adding buttons
“Learn” buttons to add them.
Refer to sectron “Usrng the learning functron” on page 18.
[21 Deleting buttons
0 Press “SETUP” in the icon display section for at
least 3 seconds to display the setup screen.
Press the “Delete Key” button on the “Setup
Z/4” page to display the device selection screen.
@ Use the - and - buttons in the icon
display section to display the Icon for the device
with the button you want to delete, then press
that icon. The button selection screen appears.
@ Use the a and
D
buttons in the page display
section to display the page contarning the button
you want to operate, then press the button you
want to delete. A confirmation screen appears.
@ Press the “OK” button. The button name is
deleted, and the remote control signals are also
deleted.
(The button itself remains.)
[31 Moving buttons
Use the procedure described below to move the
positions of buttons with screens for specific
devices.
0 Press “SETUP” in the icon display section for at
least 3 seconds to drsplay the setup screen.
Press the “Move Key” button on the “Setup
2/4” page to display the device selection screen.
@ Use the - and - buttons in the icon
display section to display the icon for the device
with the button you want to move, then press
that icon. The button selectron screen appears.
Screen 0
Screen 0
Screen 0
Screen 0
Screen 0
Screen @I
To Next Page
Loading...
